Moisture analyzer "Evlas-2M"

Evlas-2M Moisture Analyzer is intended for the rapid determination of the mass fraction of moisture in agricultural products and in its processing products, food products and confectionery products, soil, chemicals, and building materials, pharmaceutical materials, mineral ores in laboratory conditions.

Evlas-2M moisture analyzer is a compact, affordable and high-precision moisture analyzer that is ideal for quality control of products, as well as for providing entrance control in the reception departments. The analyzer is simple in operation and maintenance, it doesn't require high qualification of personnel.

Ease of operation

1. Set the drying settings for the product selected for the analysis in the analyzer’s menu.

2. Place the sample cup and 5 gram weight on the scale, the analyzer will tare the built-in high-precision scale;

3. Place the sample to be analyzed on the scale, the analyzer will measure the initial weight;

4. Close the lid and press the start button the analyzer will begin the sample drying process, the indicator will display the current measurement time, the current value of the mass fraction of moisture in % and the temperature in the drying chamber;

5. After reaching a constant weight the analyzer automatically turns off the heating, gives a sound signal and displays the analysis result the mass fraction of moisture in % and the total analysis time on the indicator.

The symbols on the display guide you through the entire menu allowing you to enter parameters quickly and easily on the control panel.

Features of the analyzer

The toroidal shape of the infrared heating element built into the drying chamber allows the sample to be dried evenly. The infrared heater is controlled by a temperature sensor located very close to the sample.

The microprocessor eliminates the possibility of errors in calculations

During 5-15 minutes drying is carried out, during which the built-in microprocessor counts all the values based on the measurement data, the final result is displayed. The moisture analyzer is switched off either in the timer mode or in fully automatic mode when the sample reaches a constant weight.

Measurement time

Depends on the humidity of the sample, the weight of the sample and the properties of the product to give moisture (on average 5-10 minutes).

Non-standard products

Evlas-2M is a universal moisture meter supplied with methodological recommendations for working with a wide range of substances (more than 300 types of food products and other materials).

If you need to control moisture in non-standard products (for which drying recommendations have not been developed):

• you can place an order for additional calibration for the products you require to analyze;

• if the analyzer is already in use our specialists can give you detailed instructions how you can achieve maximum convergence of results by conducting parallel measurements according to GOST and on the moisture meter, introducing the necessary correction of temperature/threshold/survey values. For more details, contact Sibagropribor’s service center or service specialists for an advice.

The moisture analyzer is supplied with a method of working on a wide range of substances (more than 300 types of food and other materials).

Certificates

"Evlas-2M" is registered in the State register of measuring instruments under №22077-12. The analyzer is also registered in the State register of Kazakhstan and Belarus.

Warranty: 1 year full warranty

If necessary our service centers will provide free warranty repairs and post-warranty service. The repair is carried out at a high technical level and in the shortest possible time.

The complete set of the analyzer includes the following: